ABC Design Turbo S 4F Instrukcja Obsługi Pobierz pdf (Strona 12)

EN - 07

7. Fitting and removing the guard rail

Fit the guard rail by inserting it in the plastic mounts on both sides.

To remove the guard rail from the pushchair, press in the buttons on both sides and pull the guard rail off

away from the pushchair.

To adjust the height of the guard rail, press and hold down the buttons on each side and push the bar up or

down.

8. Adjusting the leg rest

To adjust the leg rest, press in the buttons on both sides and then adjust the height.

Let go of the buttons again so that the leg rest clicks into place.

9. Fastening the harness

To fasten the harness, bring the top two plastic catches together and interlock them.

Then insert the interlocked catches into the bottom part of the fastening.

Adjust the harness to a setting where the baby is held in the correct position.

10. Unfastening the harness

To open the harness, press the button on the side.

CAUTION: Always use the shoulder harness and lap belt together.

11. Adjusting the backrest

To adjust the backrest, pull the retainer on the rear of the backrest upwards and then adjust the height.

When you have reached the required position, let go of the retainer to allow the backrest to remain in that

position.

12. Adjusting the height of the pushbar

To adjust the pushbar, press the buttons in on both sides.

Then let go of the buttons again to allow the pushbar to click into place.

13. Removing the sun canopy

Undo the zip fastener on the side of the canopy.

14. Folding the pushchair

Caution: The pushbar must be located on the rear of the pushchair!

a. Pull the two bottom levers on the pushbar upwards.

b. Collapse and fold down the frame.

c. Fold the pushbar all the way down.

Note: To unfold the pushchair, follow the instructions in point 1 “Opening the pushchair”.

Caution: Ensure that all the catches are engaged before use.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 49 50

Brak uwag

ABC Design Turbo S 4F Instrukcja Obsługi Strona 12